Garbage Disposal Repair

Masters of the service centre service equipment of various brands Bosch, Electrolux, Zanussi, Ariston and others.

Our employees take into account the peculiarities of different manufacturers and models. The manufacturer’s recommendations are observed and applied exclusively original spare parts.

If your garbage disposal suddenly breaks down, don't worry! At our service center, you can order repair for any malfunction.

Please provide us with as much information as possible about all the signs of the problem you have noticed. Don’t forget to specify the brand and model of your washing machine, as well as the year of manufacture. You can do this by filling out the form or contacting us by phone. This way, the specialist will be fully prepared for the visit and bring all the necessary tools. All work comes with a warranty!

When dealing with such complex appliances, do not attempt to repair them yourself, as this can only worsen the damage! By contacting us, you will receive service from a professional technician who will not only eliminate the cause and consequences of the malfunction but also provide expert advice on how to avoid similar breakdowns in the future, check the appliance’s functionality in all operating modes, clean the filters, and remove any possible foreign objects.

Which Garbage Disposal do our technicians repair?

Our service center technicians repair appliances from various brands—Bosch, Electrolux, Zanussi, Ariston, and others.
Our team is familiar with the specifics of different manufacturers and models. We follow the manufacturer’s guidelines and use only genuine replacement parts.

When is urgent garbage disposal repair needed?

A garbage disposal is an important part of a modern kitchen, and its breakdown can cause serious inconvenience. Some issues require immediate attention to prevent drain clogs or plumbing damage. Here are the key signs that your disposer needs urgent repair:

1. Garbage Disposal Won’t Turn On

• Signs:
  • No response when pressing the power button
  • No typical sound from the motor
• Possible causes:
  • Overload protection triggered
  • Power supply issues (outlet, plug)
  • Blown fuse or motor failure

🚨 What to do? Check the reset button on the unit and confirm power supply. If it doesn’t help, call a professional.

2. Grinding Mechanism Stuck

• Signs:
  • A humming sound when switched on
  • No or intermittent rotation
• Possible causes:
  • Hard object lodged inside (bone, metal)
  • Accumulation of fibrous waste
  • Worn bearings

🚨 What to do? Turn off power immediately. Use the special wrench (usually included) to manually turn the grinding plate.

3. Water Leaking Under the Sink

• Signs:
  • Continuous dripping around installation area
  • Water pooling in the cabinet under the sink
• Possible causes:
  • Worn sealing gaskets
  • Cracks in the unit housing
  • Loosened mounting hardware

🚨 What to do? Shut off water supply immediately to avoid flooding and furniture damage.

4. Loud Vibration or Unusual Noise

• Signs:
  • Loud humming, grinding, or knocking sounds
  • Vibration felt through the sink
• Possible causes:
  • Imbalanced grinding disk
  • Foreign object inside
  • Motor bearing wear

🚨 What to do? Stop using the disposer until it is inspected and repaired.

5. Foul Odor From the Drain

• Signs:
  • Persistent rotten smell coming from the drain
  • Slimy buildup on internal walls
• Possible causes:
  • Organic residue accumulation
  • Drain system clog
  • Problems with the rinse ring

🚨 What to do? Clean with specialized products. If odor persists, call a repair specialist.

6. Slow Operation or Poor Grinding

• Signs:
  • Waste is not properly ground
  • Increased processing time
• Possible causes:
  • Dull grinding components
  • Fibrous foods like peel or celery stuck inside
  • Motor wear

🚨 What to do? Avoid feeding tough scraps. If performance worsens, schedule servicing.

7. Automatic Shutdown During Use

• Signs:
  • Disposer turns off by itself
  • Overheat protection activates
• Possible causes:
  • Overloading
  • Motor issues
  • Thermal protection malfunction

🚨 What to do? Let the unit cool down for 20-30 minutes. If problem recurs, call for repair.

Masters of the service centre perform a complete service, starting from the elimination of small problems and ending with complex repairs